Customzied Storefront Silver Mirror 3D Letter Sign Backlit FrontLit

Product Description

Customzied Storefront Silver Mirror 3d Letter Sign Stainless Steel Metal Logo

Introduction

3D letter sign stainless steel metal logo are mostly used as storefront, buildings, office, churches, hotels, bars, event & exhibition, orgnizations, institutes etc, They could be directly cutted from solid metal board which makes the solid sign letters, or welded into 3D metal letter sign by thinner metal board. The metal letters are mostly been done with iron, stainless steel, aluminum and proceeded with various types of finishes. such as painting based on pantone code, black brush sign, black mirror, gold brush sign, gold mirror sign, silver brush, silver mirror, rose gold brush, rose gold mirror, bronze letters etc. 

Based on the lighting characters, 3D letter sign can be divided into illuminated 3D letter sign and Non illuminated 3d letter sign; The illuminated 3d letter sign include front lit sign, backlit sign, edge lit sign, full lit sign, acrylic led sign, resin letters, bulb letters, marquee letters, or any types of customized signs with led lights. The non illuminated 3D letter sign include stainless steel letter sign, aluminum letter sign, acrylic letter sign, and pvc letter sign. 

Spacifications

Sign Structures

Front part: Stainless Steel,

Return: above 2cm-20cm depth 

Back: PVC or optional

Return Finish: same as front part.

3D Metal Letter Sign Mounting Steps

1. Attach the 1:1 mounting template onto wall or any areas you want install the sign.

2. Find the drill holes on the template, drill 4mm dia holes in according depth. 

3. Fill the holes with a little bit silicone glues to strength the screws will is about to push into it.

4. Mount each screws on the backside of the letter and signs.

5. Push the screws of each letter and sign into the holes where you have drilled previously; 

6.  Keep it from touches within 24 hours

A fabricated 3D letter sign metal logo is FLUSH-MOUNTED to a surface with front "access" to a FASTENING DEVICE. But most other led illuminated sign letters and logos are mounted with a very slight stand-off from a mounting surface. This is accomplished with a BLIND MOUNT that hides the fastening hardware. Blind-mount is a specification used where a letter installation "does not have front access" to fasten a letter to a surface. Any letter which requires a stud-mount is usually a blind-mount installation such as a formed plastic letter, flat cut letter, led illuminated sign letters, halo-lit letters etc.

Our Advantages

1. The 3d letter signs we bend and welded from thicker metal board which are tough to use.

2. The components we use are CE, ROHS, UR certificated. 

3. All the 3d letter signs are well polished with high-end quality.

4. 3+ years warranty services for our customers.

5. 10-18 days delivery time to your address.

6. Standard exporting carton or Wooden boxes to make sure safe delivery.

Product Detail